Horizon Fuel Cell Technologies Automobile Parts 180-1010 User Manual download pdf (Page 15)

Installation Manual

FASS FUEL SYSTEM

STEP 3: Mounting FASS System: Use the following photo’s to complete

this step:

Photo 3A Photo 3B

Photo 3C Photo 3D

1. Assemble the fuel pump bracket to the FASS System using the 5 washers & bolts. The

2 - 3/16 washers & ¼” x 1” bolts will be used to space the bracket away from the main

base of the FASS. The 3 – 11/16” washers & ¼” x 1 ½” bolts will be used to space the

bracket away fro the pump assembly of the FASS. Refer to photo 2A. Torque to proper

specifications.

2. Assemble 3/8” x 1/2" (push lock x mpt) fittings into ports label with the letters “T” and

“E” using tread tape. Refer to photo 2A. Torque to proper specifications.

Note: The FB-1001 (frame bracket) now has multiple slots, use the slots at the end of the

bracket.

3. Assemble the FASS System with bracket to the frame bracket as seen in photo 3B

using the 4 – 3/8” bolts and flanged nuts. (NOTE: This photo is from a different make

of truck but the bracket assembly is the same.)

1 2 ... 10 11 12 13 14 15 16 17 18 19

No comments

Horizon Fuel Cell Technologies Automobile Parts 180-1010 User Manual Page 15