16
Installation Manual
FASS FUEL SYSTEM
STEP 3: Mounting FASS System: Continued
NOTE: The “L” shaped bracket attaches to the cab support on the short beds and
to the bed support on the long beds.
4. Using photo’s 3C and 3D as a guide hold the FASS System (as high as possible) with
both brackets attached into the mounting location.
5. While holding to the mounting location mark the mounting points.
6. Using a center punch, mark the center of each bolt location.
7. Drill 2 – 13/32 holes as seen in photo 3C to mount the frame bracket.
8. Using the 2 – 3/8” bolts and flanged nuts mount the frame bracket to the proper
support. Torque to proper specifications.
9. Torque the 3/8” bolts attaching the frame bracket to the fuel pump bracket to proper
specifications.
10. Located on the filters, apply motor oil to the o-rings. Attach fuel filter and water
separator. Torque to proper specifications.
Comments to this Manuals